If your pump shafts look like this we can help with solutions, packing selection, or packing installation training to help you get longer mean time to failure. Call your local GPI Fluid Sealing Specialist, or set up a Pump or Valve Packing Installation School.
►Valve Packing styles
►Pump Packing styles
►Styles that work for both Pump & Valve Packing
►CHESTERTON BROCHURES, CATALOGS, & PRODUCT LITERATURE
Check out our web site help or just call us for packing selection and/or training we have over 25 years experience.
►FSA PUMP & VALVE PACKING INSTALLATION PAMPLET
EPA FINES AND TRYING TO MONITOR EMISSIONS CAN GET VERY EXPENSIVE. LET US HELP YOU WITH YOUR EMISSIONS PROBLEMS.
►VALVE LIVE LOAD INSTRUCTIONS POWER POINT SLIDES
►KALREZ VALVE PACKING SETS Prefer a set with no live load springs to torque to keep your emmisions low? Click this file to get more details, or give us a call.
All Kits are made to fit the valve so you do not have to take a single measurement to make sure they fit. And all these sets come with Chesterton’s emissions warrantys. Call for more details.
Call us if you have tried everything you can think of to get longer packing life, we can help.
►CMS 2000 INSTALLATION INSTRUCTIONS
►CMS 2000-FP FOOD PRODUCT BROCHURE
IF YOU ARE TIRED OF SHORT PACKING LIFE AND HEAVY SHAFT WEAR CALL US, WE CAN HELP.
►How It Works
►Brochure
►Order Form
►Benefits
►Case History
►Case History
-
- TAMPING TOOLS
We have tools and equipment for sale and rental to make your packing jobs faster and easier.
►MINI WATER JET PACKING EXTRACTOR
Why stuggle to remove worn, dried out, burnt, rock hard valve and pump packing? A high pressure water jet penetrates and removes rock hard packings quickly and cleanly without damage to valve stems or stuffing box.
►THIS UNIT ALSO AVAILABLE AS A RENTAL.
►TAMPING TOOLS One of the main reasons for valve or pump packing failure, and higher emissions, is packing consolidation over a period of time after the pump or valve is in service. If the person installing does not tamp each ring to the bottom as they pack the stuffing box this problem can become even worse. These tamping tools can be cut down to your shaft and bore sizes and reused over and over again to pack a stuffing box correctly. These tamping tools are made in a valve version and pump version and can be ordered for the cross section of packing you are installing. Call one of our Fluid Sealing Specialist for more details.
►PACKING HOOKS
Packing knives are designed to cut the fibers that are used to make pump and valve packings.
The Surecut packing cutter is designed to cut 45 degree or butt cut rings in the field. Remember to use butt cuts for pump packing, and 45 degree cuts for valve packing. If you need further information on correct installation of packings you can call one of our Fluid Sealing Specialist, or schedule a Pump or Valve Packing School.
